HR1220
Options:
This receiver is definitely not color-blind.
The HR1220 Laser Receiver detects both red and green laser beams generated from crossline lasers including the LT52R, LT52G, LT56, and LT58G. The receiver can extend the indoor working range of these crossline lasers as well as increasing versatility by allowing outdoor use.
This receiver plays well with others.
It's compatible with current Spectra Precision models LT52R, LT52G, LT56, and LT58G. The receiver can extend the indoor working range of these crossline lasers as well as increasing versatility by allowing outdoor use when the beam may not be visible.
The HR1220 includes the C20 rod clamp for easy attachment to grade rods or staffs.
The Spectra Precision® LT52R Laser Tool is a rechargeable, automatic self-leveling multi-purpose tool that can be used in a wide variety of construction applications.
​
This kit comes complete and ready to go!
Specifications
Working Radius
(Laser Dependent)
85 m (275 ft.)
Laser Detection Height
127.0 mm (5“)
Elevation Readout
Front and rear LCDs
Audio Control
Loud / Low / Off
Capture Height
80 mm (3.1 in.)
Accuracy
±1.0 mm (1/16 in.)
±2.0 mm (1/8 in.)
​
Marking Notches
60 mm (2.36 in.) below top of receiver
​
Battery Life
40+ hours
​
Low Battery Indicator
Battery symbol on LCD
Power Supply
2 AA alkaline batteries
Operating Temperature
–10 °C to 50 °C (–14 °F to 122 °F)
Storage Temperature
–20 °C to 70 °C (–4 °F to 158 °F)
Automatic Shut-Off
30 min
Features & Benefits
-
Green and Red Beam Line Laser Receiver
​
-
Front and rear LCDs provides easy viewing from either side
​
-
Illuminated LCDs for readings in low light conditions
​
-
Two accuracy selections to fit various jobsite requirements
​
-
Large 80 mm (3 inch) reception height for quick beam acquisition
​
-
Audio volume High, Low or Off for various job-site conditions or individual preference
​
-
Dual horizontal and vertical level bubbles for accurate horizontal and vertical readings
​
-
Work indoors and outdoors increases laser versatility
​
-
Built-In magnets on top of receiver for quick attachment to ceiling grids or metal studs
​
-
Includes rod clamp for attachment to grade rods and staffs
​
-
Four-stage battery status indicates life of battery remaining to eliminate surprise power issues
​
-
Automatic shut-off when not in use conserves battery life
​
-
Marking notches on each side at on-grade for easy transferring of 1 meter (4 foot) marks
​
-
All around over-molding protects the unit
​
-
3-Year Warranty
